Case Studies
PRINTING BARCODES DIRECTLY FROM A PLC PROGRAM

The L-Shear uses servos to position large laminated copper sheets under a shear to cut them into precise sizes used for circuit boards. One goal of a recent control system retrofit was to allow bar code printing to be controlled by a PLC without requiring a computer or operator data entry. This mach

TUBE AND CONDUIT MATERIAL HANDLING AND BUNDLING

Kredit Automation was contracted to retrofit the PLC and HMI on a line that bundles tubes coming off the fabrication line. (Tubes are made by roll forming cut-to-length steel sections into a tube and welding the seam. Various chemical treatment and coating steps including intense UV irradiation resu

AEROSPACE AND CHEMICAL PROCESSING

In 2011 Kredit Automation was contracted to upgrade the controls on a system with two important processes: Fluoride Ion Cleaning and Chemical Vapor Deposition. This important revenue generating system had a robust Allen Bradley PLC-5 based core design, but fifteen years of continuous use was startin

ROBOTIC INTEGRATION & END OF ARM TOOLING DESIGN

Kredit Automation and Controls completely retrofit the controls on a system that produces molds for casting. The customer manufactures turbine engine components. The old control system was a functional but aging system based on a Vulcan Engineering Electrobot robot, an Allen-Bradley SLC-500 PLC, and

INDUSTRIAL WASTEWATER TREATMENT SUPERFUND SITE

Kredit Automation & Controls did a retrofit to upgrade the controller and operator interface at the Indian Bend Wash area superfund site. This is a treatment facility that removes volatile organic compounds from contaminated groundwater. KAC improved the control by upgrading the feedback control lo

Case Studies

If You Have Questions About An Application Get Real Answers From Real Experts

Get advice from an expert that specializes in your application — helping you make informed decisions.

ASK A QUESTION